Sunbed Servicing & Maintenance
Checking, Repairing, & Retubing of your Sunbed
Tansun Sunbeds understands the importance of keeping your sunbeds in top condition to ensure the best tanning experience for your clients. With over 40 years of expertise in sunbed manufacturing and servicing, we're the trusted name in sunbed repairs, maintenance, and retubing. Whether you're in need of routine servicing, repair, or a full retubing, our team is here to help.
Why Regular Sunbed Maintenance Is Essential
Regular servicing and maintenance ensure that your sunbeds continue to operate safely and efficiently, providing optimal tanning results for your customers. Neglecting sunbed care can result in reduced performance, increased downtime, and even costly repairs. To avoid these issues, it's crucial to schedule periodic maintenance, which can prevent unexpected problems that may interrupt your business.
We offer a range of services:
- Sunbed Repairing: If your equipment breaks down, our expert technicians will come to your premises and carry out repairs on-site.
- Relamping & Retubing: We offer replacement of worn-out lamps and Phillips sunbed tubes with genuine Tansun parts to restore optimal tanning performance.
- Sunbed Cleaning: We provide thorough cleaning services to maintain hygiene and improve sunbed performance.
- Installation & Removal of Tanning Equipment: Whether you're setting up new equipment or removing old units, we handle the entire process.
- Electrics Check: Ensuring all electrical components are working safely and efficiently.
- Acrylics Maintenance: We inspect and replace sunbed acrylics to ensure they remain in excellent condition.
- Genuine Tansun Spare Parts: We replace any faulty parts with new, high-quality Tansun parts to guarantee reliability.
- Technical Advice: Our team is available to provide expert guidance on maintaining your equipment and troubleshooting common issues.
Sunbed Repairs – Troubleshooting
Having trouble with your tanning equipment? Is your sunbed not working? Don't worry! Check out our quick troubleshooting tips below—you might just find the fix you need. If not, our friendly team is ready to help, and our expert Tansun Sunbed engineers can come to your premises and facilitate any repair on site!
|
Troubleshooting |
||
| Problem | Cause | What you need to do |
| The sunbed gets too hot | Firstly, check whether the sunbed fans are working properly, if they are clean and if there is any damage to the wiring. Another reason why your sunbed turns hot is maybe because there is no proper ventilation in the room. | What you can do is to open the air conditioning or the ventilation system. In general, avoid placing the sunbed too close to the wall or very close to the ceiling to make sure that it is getting proper ventilation. |
| The lamps do not ignite when I turn on the sunbed or they flash on and off | The lamps may not have been installed properly or the problem comes from other parts like the starter, the ballast, the switch or the lamp holder | Ensure that the lamps have been installed properly and then try to figure out whether the problem comes from the lamps themselves, the starter, the ballast, the switch or the lamp holder. |
| I power on the bed but nothing happens. | Maybe the sunbed is not properly plugged in or the isolator is switched off. Sometimes the emergency stop button may cause an issue like that, so make sure that it is disengaged. Bear in mind that some tanning beds do not operate if they are not in the closed position, so read the sunbed manual carefully. | Check the plug or the breaker so as to make sure that the sunbed is plugged in and there is power to the bed and also check if the isolator is switched on. You may also need to check and even replace some of the parts like the relay, the remote wall switch, the remote timer, the micro switch, the emergency stop or the overrule timer. |
| I can't keep the canopy open/ down. | Maybe there is a problem with the canopy's shocks. | Check if there is any problem with the canopy's shocks and whether they are not functioning well and need replacement or are just positioned wrongly. |
| The Changing area light is not working | This could be caused by the light not being switched on or by the bulb failing. | Check that the light is switched on and change the bulb if necessary. |
| The speakers are cracking | This could be caused if the sound system is wired incorrectly or if wires are touching. | Check that the wiring is ok on the sound system and that the wires are not touching each other. |
| The Perspex is cracking | This could be caused by the wrong chemical being used to clean the Perspex. | Use the correct cleaning solution such as warm soapy water. |
For help and support speak to us on Live Chat or visit our contact page.
Sunbed Engineer Experts
If you are looking for a trustworthy and reliable company, which is known for its excellence in sunbed servicing and maintenance, call Tansun Sunbeds now on 0121 289 9907
Why Tansun Stands Out Among Sunbed Manufacturers
Tansun Sunbeds, combine decades of experience, precision engineering, and a commitment to sustainability to produce superior tanning beds UK.
Whether you need commercial sunbeds for your salon, vertical sunbeds for home hire business start-ups, or ongoing support for legacy products like the VT2000 and Spectrum Sunbeds, Tansun delivers unmatched quality and performance.
